EPOXYPLAST 100P Universal Resin 0,75 Kg
Code: 6497Related products
Product detailed description
Key Features of EPOXYPLAST 100P Laminating Resin
- Highly transparent - improved new formulation
- Stable crystallization thanks to A/F technology
- Cast thickness 0.1-1 cm at 20°C
- Mixing ratio 2:1 by weight (resin : hardener)
- Processing time (20°C) approx. 30 min depending on the amount of material
- Recommended ambient temperature 15-22 °C
- Clear transparency in both components
- Low viscosity
- Non-toxic, BPA free, odourless
- Solvent free - VOC 0 g/L
- Self-leveling
- Excellent self-venting for a bubble-free surface
- Excellent substrate and backfill wettability
- Compatible with e.g. wood, concrete, glass, metal, fibreglass and carbon fibre, natural stone, silica sand, marble, granite
Small castings 0,1-1 cm
It enables casting of small castings up to 0.1-1 cm thick (at 20°C).
Processing time up to 30 min
The long processing time of up to 30 min provides sufficient time for mixing, pigmentation and debubbling of the mixture. Depending on the amount of material.
Ideal working temperature 15-22 °C
It cures at low temperatures as low as 15 °C. The recommended temperature should be 20 °C.
Primary use of EPOXYPLAST 100P epoxy resin
- Production of transparent or coloured jewellery from silicone moulds with a casting height of 1-10 mm (even larger casting quantities are possible depending on room temperature and the amount of material <19°C).
- Production of trays, coasters and much more.
- Production of glass and carbon laminates.
- For priming (penetrating epoxy resin) e.g. open pore wood (for river tables, lamp or furniture structures etc.), metal, concrete, screed.
- For the production of stone carpets, mortars, etc.
- For casting or lamination (e.g. spray lamination, pressing, infusion technique, vacuum, hand lamination)
Recommendations for the use and storage of EPOXYPLAST 100P epoxy casting resin
- Resin should be stored in a dry place, minimum temperature 10 °C
- Protect from sunlight
- Keep out of reach of children.
- Resin and hardener should not be stored in an open container
- Application should be carried out where humidity is below 60% and temperature between 15 - 22 °C. If necessary, use a dehumidifier
- Resin should be used within one year of purchase
EPOXYPLAST 100P Component A
  |
WARNING! Contains: 2,2-Bis[4-(2,3-epoxypropoxy)phenyl]propane, Reaction mass of 2,2'-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and 2-({2-[4-(oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and 2,2'-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane(alkoxymethyl)oxirane (alkyl C12-C14)
H315 Irritating to skin. H319 Causes severe eye irritation. H317 May cause allergic skin reaction. H411 Toxic to aquatic organisms, with long-lasting effects. P261 Avoid inhalation of dust/smoke/gas/mists/vapours/aerosols. P264 Wash thoroughly after handling. P272 Do not remove contaminated work clothing from the workplace. P302+P352 IN CASE OF CONTACT WITH SKIN: Wash with plenty of water. P305+P351+P338 IN CASE OF EYE CONTACT: Rinse gently with water for several minutes. Remove contact lenses, if fitted and if they can be removed easily. Continue rinsing. P362+P364 Remove contaminated clothing and wash before reuse. P333+P313 In case of skin irritation or rash: seek medical attention/treatment. P321 Professional treatment (see on this label). P337+P313 If eye irritation persists: Seek medical advice/treatment. P501 Dispose of contents/content in accordance with local/regional/national/international regulations.
UFI: GK80-S0T5-M008-Y09F
EPOXYPLAST 100P Component B
  |
H302 Harmful if swallowed. H314 Causes severe skin and eye damage. H317 May cause allergic skin reaction. H412 Harmful to aquatic organisms, with long-lasting effects.P260 Do not breathe dust or mist. P303+P361+P353 IN CASE OF CONTACT WITH SKIN (or hair): Remove all contaminated articles of clothing immediately. Rinse skin with water [or shower]. P305+P351+P338 IN CASE OF EYE CONTACT: Rinse gently with water for several minutes. Remove contact lenses if they are in and if they can be removed easily. Continue rinsing. P310 Call the TOXIC INFORMATION CENTRE/physician immediately. P362+P364 Remove contaminated clothing and launder before reuse. P405 Store locked. P501 Dispose of contents/content in accordance with local/regional/national/international regulations.
UFI: DP80-90GJ-W00R-NAVH
Additional parameters
| Category: | Epoxy Resins |
|---|---|
| Weight: | 0.88 kg |
| ? Epoxy System Type: | Epoxyplast 100P Universal |
| Color: | Highly transparent |
| Max thicknesses: | 1 cm |
| ? UV Resistance: | Medium |
| Casting Size: | Small Casting |
| Poměr míchání - váhový: | 2 : 1 (pryskyřice : tvrdidlo) |
| ? Doba zpracovatelnosti: | 30 min |
| ? Ideální pracovní teplota: | 15 - 22 °C |
| ? Hranice exhoterm: | 38 °C |
| Smrštění: | > 0,1 % |
| VOC: | 0 g/l |
| ? TG Ultimate: | 70 °C |
| The item has been sold out… | |
Be the first who will post an article to this item!
Be the first who will post an article to this item!