Rubio Monocoat Oil Plus SMOKED OAK Part A

Code: 6826/000020 6826/000100 6826/000300 6826/001000 6826/002750 Choose variant
5,55 € 19,66 € 56,82 € 118,47 € 297,91 € from 5,55 € 4,59 € excl. VAT 16,25 € excl. VAT 46,96 € excl. VAT 97,91 € excl. VAT 246,21 € excl. VAT from 4,59 € excl. VAT
IN STOCK (2 pcs) IN STOCK (2 pcs) IN STOCK (1 pcs) IN STOCK (1 pcs) Send within 5 working days Choose variant
Package size
Chosen variant is not available. Reset selected parameters.
Delivery to:
15/11/2024 15/11/2024 15/11/2024 15/11/2024 22/11/2024 Choose variant
Delivery offer

Colored hard wax oil without accelerator, suitable for surfaces with less load - furniture, wooden interior linings, etc. It is applied only in one layer!

Detailed information

Product detailed description

Rubio Monocoat Oil Plus SMOKED OAK - Hard wax oil for interior wood protection 

Rubio® Monocoat Oil Plus is a representative of a new generation of high-quality and ecological wood surface treatment. If you are looking for a suitable oil for a less stressed surface - furniture, wooden interior linings, toys and the like, you have come to the right place! RMC Oil Plus meets the strictest requirements of European and American hygiene standards and at the same time excels in its long-term resistance to abrasion and water. Everyone who works with wood is looking for the easiest way to treat the surface and, above all, to do it quickly and without "cats". We can completely fulfill this requirement! 

All you have to do is spread the oil with a sponge or a pad, then wipe it dry with a cloth and you're done - there's no more risk of leaving a thumbprint on the surface when handling your piece!  

Rubio Monocoat Oil Plus SMOKED OAK složka A

Key properties of Rubio Monocoat Oil Plus

  • Consumption: 30 – 50 m2 from one litre
  • For surfaces with less load - furniture, wooden interior linings, etc.
  • Easy work without "cats"
  • Solvent free = VOC 0%
  • Product based on natural products.
  • Does not contain water.
  • The natural appearance of the wood will be preserved.
  • Very low consumption = cost-effective product!
  • Suitable for all types of wood - furniture, wall cladding, etc.
  • Easy maintenance of oiled surfaces - long-term protection.
  • Very fast curing: 80% in 2 days.
  • Water and heat resistant, ideal for kitchens and bathrooms.

Ecological composition and a wide range of colors

The basis is linseed oil, the other components are mixtures of natural waxes, oils and color pigments , thanks to which we can offer a wide range of color shades already in the standard offer. The colors can be mixed with each other, so you can easily handle requests for special color variations. If 40 basic colors are not enough, we offer other options in the form of reactive or non-reactive preparations for coloring wood before the final protective layer. The next one will only be up to your imagination.

Rubio Monocoat Oil Plus SMOKED OAK složka A
Rubio Monocoat Oil Plus SMOKED OAK složka A

Focused on quality and a healthy interior

Rubio Monocoat is the first manufacturer focused on surface treatment of wood to receive the Eurofins Indoor Air Comfort certificate. 
Rubio Monocoat Oil Plus SMOKED OAK složka A

Does not contain solvents

Unlike other wood oils, Rubio Monocoat products contain no volatile organic compounds (VOCs) and are environmentally friendly.
Rubio Monocoat Oil Plus SMOKED OAK složka A

Safe to use in the kitchen and on toys

Rubio Monocoat Oil Plus 2C and RMC Hybrid Wood Protector meet the EN 71-3 standard and are completely safe to use on wooden toys, kitchen tops, dining tables, etc.
Rubio Monocoat Oil Plus SMOKED OAK složka A

For food contact

Rubio Monocoat Oil Plus 2C is fully compliant when applied to a wooden surface.
Rubio Monocoat Oil Plus SMOKED OAK složka A

Instructions for use

  1. Sand the surface of the wood carefully, any previous coating must be removed. Vacuum with a vacuum cleaner and remove the remaining dust with RMC Cleaner. 
  2. (applies only to the 2C version with accelerator) Mix oil with accelerator (1-2 minutes) in a ratio of approximately 3:1 (3 parts oil A and 1 part accelerator B). 
  3. Once the surface is dry after cleaning, spread a small amount of RMC Oil Plus 2C oil (with a cloth, sponge or polishing machine fitted with a beige pad). Work in sections of 5 – 10 m2. 
  4. Allow the oil to react for a few minutes and then wipe off any excess oil (with a rag or polisher fitted with a white pad). Wipe each section within 15 minutes. The surface must be dry to the touch! Complete the entire work in the same way. 
  5. In a well-ventilated room, the surface can be used 24-36 hours after application.

Maintenance with water and RMC cleaning agents can be carried out after 5-7 days. Rubio® Monocoat must be used for maintenance as a guarantee for long-term durability and surface resistance. 

Tips and tricks

  • The product MUST NOT be diluted with anything!
  • Mix the oil (A) thoroughly before application.
  • For large areas and when using multiple packages, we recommend mixing them together to achieve a uniform color shade. 

Packaging

  • 20 ml / 100 ml / 300 ml / 1 L / 2,75 L – only RMC Oil Plus 2C (A) does not contain an accelerator
  • 130 ml – set of 100 ml RMC Oil Plus 2C (A) + 30 ml RMC Accelerator (B)
  • 390 ml – set of 300 ml RMC Oil Plus 2C (A) + 90 ml RMC Accelerator (B) 
  • 1.3 l – set 1 l RMC Oil Plus 2C (A) + 0.3 l RMC Accelerator (B) 
  • 3.5 l – set 2.75 l RMC Oil Plus 2C + 0.75 l RMC Accelerator (B)
Rubio Monocoat Oil Plus SMOKED OAK složka A

FAQ's

Is Oil Plus 2C safe to use on cutting boards?

We do not recommend using Oil Plus 2C on cutting boards or butcher blocks that will be used for cutting.

Rubio Monocoat oil forms a molecular bond with the topmost microns of the wood. A knife can cut deeper than the product penetrates, leaving raw wood exposed and susceptible to mold and or bacteria growth.

However, as our product is safe to use on food surfaces, it is acceptable to use on charcuterie and serving boards.

Can I put a lacquer over Oil Plus 2C finish?

We cannot guarantee adhesion, so you must discuss this with the lacquer manufacturer. 

Can I use Oil Plus 2C over our existing finish?

No, Oil Plus 2C must come in contact with raw cellulose in order to properly work. 

How can I add more sheen?

Universal Maintenance Oil can be applied over Oil Plus 2C to increase the sheen level by 6-8%. Universal Maintenance Oil should not be applied to raw wood. 

How soon can I apply Universal Maintenance Oil?

You can use Universal Maintenance Oil 48 hours after the proper application of Oil Plus 2C. 

Do I have to use multiple coats for certain species of wood?

Because the product will not bond to itself, multiple coats are not needed. On softer species like walnut, a second application may be necessary to make sure that all areas have fully had the opportunity to react with the oil. 

Can I cover floors after they have been finished with Oil Plus 2C?

Yes, wood floors finished with Oil Plus 2C can be covered with a non-staining construction paper 48 hours after application.

Please remember:

  • Never tape directly to the floor.
  • Only tape paper to paper.
  • Covering the floor will extend the cure time.

How long does Rubio Monocoat last?

A lifetime with proper maintenance. We would expect the first maintenance to be needed somewhere between 2 and 5 years depending on wear. 

Does Oil Plus 2C work on all wood species?

Yes 

What is the recommended sanding grit?

Recommended final sanding grit is 120 - 150. We recommend sanding according to industry guidelines. 

What is the Oil Plus 2C curing time?

Under typical application and drying conditions:

  • 24 hours - Gently handle or walk with socks
  • 48 hours - Furniture can be introduced (no mats or carpets)
  • 5 days - Full cure and liquid resistance.

How long do I have to wait to walk on the floor after applying Oil Plus 2C?

You can walk on the floor with dry socks 8 hours after a proper application. However, it is best practice to wait 24-36 hours before walking on the floor. 

Rubio Monocoat Oil Plus SMOKED OAK složka A

Rubio Monocoat

The company Muylle-Facon was founded in 1906. It produced high-quality putties and sealants for woodworking companies and glaziers. Over time, production expanded to include construction chemicals, focusing on waterproof materials, water-resistant coatings, and sealants used in construction.

In 1962, the first range of products aimed at wood treatment and protection against weathering was introduced.

Over time, through close collaboration between the development department and a team of experts from the woodworking industry, a unique single-coat wood protection system was developed: Rubio Monocoat oils.

Today, Rubio Monocoat products are recognized for their quality and affordable price by customers worldwide. The sales network covers 80 countries, from Australia through Asia and Europe to the USA.

Additional parameters

Category: Rubio Monocoat Interior Protection
Cure Time: 21 days
Color: Colored
Volume: 20 ml, 100 ml, 275 ml, 1 L, 2,75 L
VOC Content: 0%
Number of Coats: 1
Usage Type: Wooden Aalls and Ceilings, Furniture, Windows and doors, Children's toys, OSB boards
With Accelerator: No
Shelf Life: 36 months
Coverage: 30 - 50 m2 per Liter

How to apply Oil Plus 2C to Epoxy River Table

How to oil your new wooden floor with the Oil Plus 2C

Jak aplikovat Oil Plus 2C na epoxidový stůl

Rubio Monocoat Oil Plus 2c Application with a Polishing Machine

Rubio Monocoat Oil Plus 2c Furniture Application (Manual)

Be the first who will post an article to this item!

Do not fill out this field:

Be the first who will post an article to this item!

Do not fill out this field: